Performance Freeride/Wave kite. Open C-shape
7m / 9m / 12m
NOW ON CRAZYSALE
Warning: Last items in stock!
CrazyFly brand has been built on high quality manufacturing in the heart of Europe and exceptional customer service. We are extremely proud to be the first and only Kiteboarding brand producing all of our products in our own factory based in Europe. In addition to our in-house production of kiteboards, control bars and board accessories, we managed to transfer the kites and surfboards production to Europe.
By challenging the traditional kite construction for improvements, we came up with the swept leading edge seam. The leading edge seam on the wingtips of the kite is swept higher towards the canopy where it has less influence on airflow. This allows for higher aerodynamic efficiency and more precisely controlled kite.
Brand new this year, we introduced large Dacron shields to reinforce stress joint areas on the kite and also to protect these areas from wear. Unlike 3D shaped plastic protectors which are not aerodynamic, the Dacron Shields are snug and allow for efficient airflow. Dacron is highly resistant to abrasion and increases the kite’s durability.
This revolutionary feature increases the kite’s rigidity and reactivity allowing for better flight experience. Every seam on the kite gets stretched over time, especially in the stressed area pulled by the backlines. So, instead of using multiple Dacron panels, we used a single United Dacron Panel. The reactions of the kite are noticeably quicker and they do not fade over time.
Another upgrade this year is the Synergy Strut Bond, in other words, how the strutsconnects to the canopy of the kite. Instead of a single attachment seam, we connected the strut to the canopy with two parallel seams, creating the ultimate synergy between the strut and the kite. This synergy noticeably improved how the kite generates power during turns and kiteloops and how it holds its shape during flight.
This year, we have completely re-designed the trailing edge. Instead of using a straight stripe of extra ripstop, we created a much stronger Sinusoid Trailing Edge made from Marcloth. The sinusoid shape evenly spreads tension and reduces flap. This results in a much stronger and more solid trailing edge.
Arptex sits at the top of abrasion resistant polyamide textiles. This high tech fabric made in Italy can handle plenty of abuse without getting damaged. The official number is 100 000 contacts with abrasive surface before the material starts deteriorating. This is why we selected Arptex as the most suitable material to protect CrazyFly kites in the most abused areas.
Brand new for 2017 kites, the Linked Bridle does not have any pulleys nor sliders. It creates a direct link between the rider and the kite, resulting in faster kite reactions and more controlled handling. The Linked Bridle is also much more durable than conventional bridles, as it reduces bridle line movement and abrasion to minimum.
We narrowed down the number of panels by nearly 50% on all our kites. Because the material itself is always stronger than a seam, having less panels and less seams results in a much stronger leading edge. Less seams also increase precision of the leading edge shape, as seams can cause a small misalignment. The two in one leading edge is the most precise and the strongest leading edge till date.
The strut ends are one of the most abused areas, mainly when carrying the kite inflated on the beach, or during self launches. The strut ends are strategically reinforced with Arptex material, which sits at the top of abrasion resistant polyamide textiles.
We have completely changed how the strut is connected to the leading edge. The connection is now stronger, cleaner and straighter without unwanted material folds, which cause quicker wear. The whole junction is reinforced with Arptex material for ultimate strength and durability.
Towards the end, the leading edge diameter has been optimized and decreases to prevent the bladder slipping out of the kite under pressure. The inside of the leading edge end is lined with a softer version of Arptex to create a cushion for the bladder and prevent any damage to the bladder during a kite crash. On the outside the Leading Edge Ends are protected with Arptex, the latest abrasion resistant polyamide textile from Italy.
The Wingtip Elbow construction is stronger than ever with brand new Dacron reinforcements on the inside and Marcloth lining on the outside. Plus, the Swept Leading Edge Seam is placed in the direction in which the elbow was bending the most. These factors minimize the elbow movement, so the kite is more compact, has higher aerodynamic efficiency and better handling.
Unlike on other kites, we selected a slimmer Lightweight Zipper covered with webbing to prevent sand from getting stuck into the zipper. This results in flawless function of the zipper, saves weight on the kite and overall looks much cleaner than a big heavy uncovered plastic zipper.
The Pump Leash is one piece with the central strut reinforcement. Instead of sewing the pump leash on the kite separately, which creates a point of weakness on the leading edge, we opted for creating the pump leash from the central strut reinforcement.
The most technologically advanced ripstop material for a kite canopy. This high density polyester yarn provides for ultra light weight, high tearing strength and long lasting durability. This year, the Double Ripstop has a brand new coating which increases strength by 30% and minimizes stretching of the material. The new Double Ripstop is lighter, has the same tearing strength in all directions, and allows 30% less air through itself.
All CrazyFly kites are equipped with Turbo inflate/deflate valve. Inflation and deflation of the kite are made through the same valve. The kite is fully inflated and deflated in seconds. This year, the Turbo valve has a new cover made from Arptex, which does not intake water and does not add weight to the kite.
The One Pump System allow for quicker and easier inflation and deflation of the kite and ensure even pressure distribution throughout the kite. The valves are made from the highest quality material available and are manufactured in Europe. Brand new this year, the one pump hose clips are covered with Arptex, which unlike Neoprene does not intake water which reduces weight.
All 2017 CrazyFly kite colors are custom developed shades supplied exclusively to CrazyFly only.
CNC controlled laser cutting ensures maximum precision of all kite panels and results in accurate kite shapes. CNC controlled laser cutting also reduces waste of offcut material. CNC sewing is used for critical and difficult seams on all CrazyFly kites. This technology eliminates human error and enables perfection to be repeated on every seam.
Our engineers use Marcloth to strengthen all areas where the heavy duty kite frame materials meet the lightweight canopy. Marcloth is a mid-weight high strength fabric, ideal to create the ultimate fusion between the higher weight and lighter weight fabrics. All transitions between the frame and canopy are in round shapes, rather than sharp angles and straight lines, as the round shapes spread tension more evenly. Of course, this increases the durability of the kite.
The Snow & Sand Protectors on the leading edge protect the kite from damage caused by dragging the kite on snow or land when launching or relaunching the kite.
There are three back line settings on the wingtip of the kite. These allow the rider to tune the kite to his or her preferences. The fast back lineset up provides the quickest turning of the kite and the lightest bar pressure. On the medium setting the kite still turns relatively quickly and there is more load on the bar. On the slow setting the kite turns noticeably slower and the bar pressure is high.
No customer reviews for the moment.